SwiftVision Supplemental Materials

April 9th, 2016 3 comments

Swift Vision

Recently, I posted a “short” video about the CM5 lights and transcribing their states automatically in Swift. Here is a link to the github repository. I’ve just committed an update that includes and enables “Mode 5” of the LED panel, in addition to the “Mode 7” that I had before.

For fun, here’s a new histogram of the mode 5 video, which I captured on an iPad.

histogram

Also, the timeline for mode 5 (really more a function of the lighting and ipad)

timeline

What I’m sure iskunk and Mark are really after is the transcribed animation steps:
Mode 5

Tags:

64-bit userspace on Nvidia TX1

March 10th, 2016 No comments

I’ve been having trouble getting a 64-bit userspace up on the Nvidia TX1 (Linux4Tegra uses 32-bit), so I thought I’d share my progress and steps.

See the end of this post for a comment about how I actually got this working. These instructions don’t work as they are, but I’m leaving them here for posterity.

To begin with, I use Debian (or Ubuntu, or whatever) for most of my work, so that’s what this guide will be based on. Also, you’ll need to have another drive to use with your TX1. Linux4Tegra (L4T) will be installed on the on-board MMC device, and we’ll be installing Debian Sid on the other drive.

You’ll need to copy the extensive partition scheme that Nvidia builds on the MMC (there’s something like 8-9 partitions) onto your target drive. I do this by dd’ing the entire MMC onto the target

sudo dd if=/dev/mmcblk0 of=/dev/mmcblk1 bs=4096

Then we need to mount the root filesystem on the target device somewhere

sudo mkdir /mnt/rootfs
sudo mkfs.ext3 /dev/mmcblk1p1
sudo mount /dev/mmcblk1p1 /mnt/rootfs

Debootstrap will do the work of making the new (very minimal) root filesystem. It’s very important to include the –arch flag, otherwise the bootstrap process will generate a rootfs using armhf, and we’ll be stuck with a 32-bit userspace again.

sudo apt-get install debootstrap
sudo debootstrap --arch=arm64 sid /mnt/rootfs http://debian.osuosl.org/debian

As I said the rootfs will be VERY minimal, so we need to install tons of important stuff, including locales, keyboard maps, ssh server, etc… But, before we do that we have to chroot into the new rootfs:

sudo mount -o rbind /dev rootfs/dev
sudo mount -t proc none rootfs/proc
sudo mount -o bind /sys rootfs/sys
sudo chroot rootfs /bin/bash
source /etc/profile
apt-get update
apt-get install ssh openssh-server make gcc libncurses5-dev bc locales
dpkg-reconfigure locales

Then, we need to add information about the network interface to /etc/network/interfaces:

auto lo
iface lo inet loopback

allow-hotplug eth0
iface eth0 inet dhcp

The current linux-upstream kernel has support (though apparently, rudimentary) for the TX1. This should obviate the need for the binaries supplied with L4T. So, let’s clone the kernel repo and build one.

cd /usr/src
git clone git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git linux-next
cd linux-next
cp /proc/config.gz ./
gunzip config.gz
cp config .config
make oldconfig (press enter until it's done)
make menuconfig
(in General Setup, select "open by fhandle syscalls")
(in Drivers->General, delete all the extra firmware names listed)
make
cp build

Next, we have to copy the entry that selects the boot mode in /boot/extlinux/extlinux.conf and edit it to select our new rootfs. We’ll leave the old one there so we can swift back and forth. This is especially helpful if something breaks.


LABEL debian
MENU LABEL debian kernel
LINUX /boot/Image-next
FDT /boot/tegra210-p2371-2180.dtb
APPEND fbcon=map:0 console=tty0 console=ttyS0,115200n8 tegraid=21.1.2.0.0 ddr_die=2048M@2048M ddr_die=2048M@4096M section=256M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=${lp0_vec} nvdumper_reserved=${nvdumper_reserved} core_edp_mv=1125 core_edp_ma=4000 gpt root=/dev/mmcblk1p1 rw rootwait

The last thing to do in the chroot is to set the root password to something, and allow (for now, change it later!!) root login over ssh:

passwd
vi /etc/ssh/sshd_config
...
PermitRootLogin yes
...

Now, we need to really dive into to some somewhat painful work. We have to setup a serial console onto the board, and have another computer (specifically a x86-64 machine running Ubuntu 14.04) to run the L4T apply_binaries.sh tool. First, the serial port connection is explained at elinux. Then, you need open a serial terminal to the board with 115200 baud. Once that’s done, reboot the board, and prevent u-boot from autobooting. In the uboot console, enable the USB Mass Storage mode:

Tegra210 (P2371-2180) # ums 0 mmc 1
UMS: disk start sector: 0x0, count: 0x39f0000

Then, with the usb cable connected from the TX1 to your x86-64 box run apply_binaries.sh:

sudo mount /dev/sdg1 /mnt/rootfs/
sudo LDK_ROOTFS_DIR=/mnt/rootfs ./apply_binaries.sh
sudo umount /mnt/rootfs

The problem I’ve been having is that the USB keyboard that I have doesn’t work on the console. It’s obviously a HUGE bummer to not be able to login to a machine using the console. ūüôĀ

I ended up following these instructions to net-install debian arm64 on my SD card. The limitation here is that most of the things that makes this an Nvidia device (GPU, CUDA, etc) don’t work. For my needs, I only want a Arm64 to work on a Swift port, so I don’t care.

References:

http://forum.lemaker.org/thread-3312-1-1.html
https://wiki.debian.org/Arm64Port
https://devtalk.nvidia.com/default/topic/916095/a-debian-experience/#4804151

Getting started with Swift and Raspi V.2

January 8th, 2016 4 comments

While progress with Swift on ARM has been very encouraging, there have been a few reports of people having trouble with it. ¬†This post is intended to be a step-by-step, starting with a brand-new Raspberry Pi version 2 and a freshly-made Raspian image (note that other distributions might work, I’ve only verified raspian).

Setup the raspberry pi

I expect that you can ssh to your raspberry pi (hereto referred to as raspi), and that you’ve run the raspi-config utility.

First, you need to expand the range of debian repositories in order to access the required prerequisites.  To do that, edit /etc/apt/sources.list:

sudo nano /etc/apt/sources.list

and uncomment the last line in the file, which should look like this:

deb-src http://archive.raspbian.org/raspbian/ jessie main contrib non-free rpi

Then, you’ll need to update your repositories.

sudo apt-get update

Install prerequisite software

Once that’s complete, install clang

sudo apt-get install clang

Option 1: install from tarball

A tar of the swift installation (usually more up to date) is available from my website. You can install this in either your system root, or from another directory. I do all of my testing with it installed in the system root, and therefore things are more likely to work. However, you’re putting your system at more risk by doing that. Keep in mind, though, that you’re playing around with alpha-level software on your <$100 computer… YOLO.

cd /
sudo wget http://housedillon.com/other/swift-armv7.tar.gz
sudo tar -xzpf swift-armv7.tar.gz
rm swift-armv7.tar.gz

Option 2: install with Joe Bell’s repo

Joe @iachievedit¬†did a fantastic job creating a debian repository for the swift compiler and tools, and he’s hosting it in an amazon aws¬†instance. ¬†Taking this route has some huge advantages. ¬†First among them is that they’re only updated when things are stable-ish. ¬†The version hosted at my website can change frequently, and it might even be completely broken!

Rejoice!

Now, assuming that everything went according to plan, you should be able to compile programs written in swift. Also, you should be able to use glibc and Foundation.

pi@raspberrypi:~ $ cat hello.swift 
import Glibc
import Foundation

let now = NSDate()

print("Hello world at \(now)")
pi@raspberrypi:~ $ swiftc hello.swift 
pi@raspberrypi:~ $ ./hello 
Hello world at 2016-01-09 05:36:31 +0000
pi@raspberrypi:~ $ uname -a
Linux raspberrypi 4.1.13-v7+ #826 SMP PREEMPT Fri Nov 13 20:19:03 GMT 2015 armv7l GNU/Linux

Not so fast

Ok, so there are some caveats. For one, it seems like the REPL is kinda broken on the Raspi v.2. ¬†Joe noticed this, too. ¬†I’m not sure what the root cause is for this one. ¬†It works on the original raspberry pi (armv6), and it works on the Beaglebone Black and Nvidia Tegra (armv7).

Also, things are very alpha-level, so expect the unexpected.

Tags:

Swift available for Beaglebone/RasPi

December 20th, 2015 2 comments

I was able to succeed in building Swift and Foundation for Ubuntu on ARMv7. This includes the Beagle Bone/Board, the Raspberry Pi, Tegra TK1, Cubox, and so much more…

This is more-or-less alpha-level at this point, but you should be able to compile and run basic swift programs that use the standard library, Glibc, or Foundation. Keep in mind that, even for x86_64, Foundation is far from complete.

To install, you can either un-tar in your root directory (which will install into /usr) or, create a new directory in /opt (for example /opt/apple, or /opt/swift) and update your paths. If you choose to install into /usr you’re running a much greater risk to your system, and you had better be willing to re-install if from scratch!! ūüôā

Once it’s installed, give swiftc a try:

wdillon@arm:~$ cat hello.swift
print("Hello world!")
wdillon@arm:~$ swiftc hello.swift
wdillon@arm:~$ ./hello
Hello world!
wdillon@arm:~$ uname -a
Linux arm 4.1.12-ti-r29 #1 SMP PREEMPT Tue Nov 10 00:38:08 UTC 2015 armv7l armv7l armv7l GNU/Linux
wdillon@arm:~$

You can download the file here.

If you want to contribute to the effort, there are still a few tests that fail in stdlib that could be addressed, the swift package manager still doesn’t work, lldb doesn’t work, Foundation isn’t finished, and it would probably be pretty great to have swift wrappers for GPIO pins and peripherals (such as SPI, I2C, etc.)

Building open source Swift on ARMv7

December 14th, 2015 2 comments

Apple recently open sourced their Swift language and compiler. ¬†I’m pretty excited about this (huge Swift fan), and I wanted t project to help motivate me to dig in. ¬†I also do a lot of work with embedded linux at work, so I’m eager to use this great language there, too. ¬†So, I found an existing feature request in the issue tracker that Apple set up for swift. ¬†I was pleased that they had already given it ‘medium’ priority, but I know that if you want something to happen sooner than later, you should just start working on it.

I’ve done enough linux work that I know that if you start deviating from the officially supported distro. you start making work for yourself pretty quickly, so I decided to limit myself to only ARMv7 systems that I can get a Ubuntu 14.04 image for. ¬†In my case that was a BeagleBone Black (BBB) and a Nvidia Tegra TK1. ¬†If you can, go with the Nvidia every time (The TX1 has 3GB of RAM). ¬†It’s much faster, and has 2GB of RAM¬†to the BBB’s 512MB. ¬†Whatever amount of RAM you have (less than probably 16GB), you’ll need to setup some swap space. ¬†Also, depending on whether you’re using a SD card, you might need to set aside at least 8GB of space to store the source and build products.

utils/build-scrip

To begin with, we need to understand the build process. ¬†Apple’s documentation¬†makes it plain that you should use the utils/build-script script to build, and that any processes outside of that system aren’t supported:

For all automated build environments, this tool is regarded as *the* *only* way to build Swift.  This is not a technical limitation of the Swift build system.  It is a policy decision aimed at making the builds uniform across all environments and easily reproducible by engineers who are not familiar with the details of the setups of other systems or automated environments.

This script is responsible for parsing the arguments presented on the command line, printing help text, making build directories, and a prepares things for utils/build-script-impl.  A read through it yields no information about architectures at all, so we move on to build-script-impl.

utils/build-script-impl

Most of the real work occurs in build-scipt-impl. ¬†Right away, we’re presented with architecture specific parts.

LLVM_TARGETS_TO_BUILD="X86;ARM;AArch64"

This line sets a variable that will eventually tell the LLVM build process (several packages need to build to support Swift.  One of those is LLVM, another is Clang) which architectures it should be able to generate machine code for.

This script is a little hard to follow because it’s well over 1000 LOC, and there are functions mixed in with top level code. ¬†In this section, I’ll trace the execution of the file rather than file order. ¬†I’ll also omit anything that doesn’t have a bearing on target/host architecture.

# A list of deployment targets to compile the Swift host tools for, in cases
# where we can run the resulting binaries natively on the build machine.
NATIVE_TOOLS_DEPLOYMENT_TARGETS=()

# A list of deployment targets to cross-compile the Swift host tools for.
# We can't run the resulting binaries on the build machine.
CROSS_TOOLS_DEPLOYMENT_TARGETS=()

# Determine the native deployment target for the build machine, that will be
# used to jumpstart the standard library build when cross-compiling.
case "$(uname -s -m)" in
    Linux\ x86_64)
        NATIVE_TOOLS_DEPLOYMENT_TARGETS=("linux-x86_64")
        ;;
    Linux\ armv7*)
        NATIVE_TOOLS_DEPLOYMENT_TARGETS=("linux-armv7")
        ;;
    Linux\ aarch64)
        NATIVE_TOOLS_DEPLOYMENT_TARGETS=("linux-aarch64")
        ;;
    Darwin\ x86_64)
        NATIVE_TOOLS_DEPLOYMENT_TARGETS=("macosx-x86_64")
        ;;
    FreeBSD\ x86_64)
        NATIVE_TOOLS_DEPLOYMENT_TARGETS=("freebsd-x86_64")
        ;;
    *)
        echo "Unknown operating system"
        exit 1
        ;;
esac

This section of code determines what the native platform is, both in terms of OS and architecture. ¬†The native tools deployment targets is an array of native targets. ¬†This could be something like building for multiple arm targets that (may) be binary compatible, like different hard(or soft)-float versions. ¬†The case block matches on the results of uname -s -m, which on most ARM platforms will return something like this: “Linux armv7l”. ¬†You’ll almost always see the ‘l’ after armv7. ¬†We don’t want to be that specific, so we’ll match just the armv7 part. ¬†The cross tools deployment targets variable is used to specify the cross compilers that should be built. ¬†However, we can’t just put “linux-armv7” into this list to build a cross compiler, not yet anyway:

# Sanitize the list of cross-compilation targets.
for t in ${CROSS_COMPILE_TOOLS_DEPLOYMENT_TARGETS} ; do
    case ${t} in
        iphonesimulator-i386 | iphonesimulator-x86_64 | \
        iphoneos-arm64 | iphoneos-armv7 | \
        appletvos-arm64 | appletvsimulator-x86_64 | \
        watchos-armv7k | watchsimulator-i386)
            CROSS_TOOLS_DEPLOYMENT_TARGETS=(
                "${CROSS_TOOLS_DEPLOYMENT_TARGETS[@]}"
                "${t}"
            )
            ;;
        *)
            echo "Unknown deployment target"
            exit 1
            ;;
    esac
done

This code will trap on any entry in that array that isn’t in the list above. ¬†It would probably be possible to add linux targets there eventually, but for now let’s move on. ¬†I want a native compiler for ARM, not a cross compiler. ¬†The next thing that we come across is the determination of the platform for which we want the stdlib built for. ¬†This case, like the prior one, matches on armv7, and ignores the suffix.

# A list of deployment targets that we compile or cross-compile the
# Swift standard library for.
STDLIB_DEPLOYMENT_TARGETS=()
case "$(uname -s -m)" in
    Linux\ x86_64)
        STDLIB_DEPLOYMENT_TARGETS=("linux-x86_64")
        ;;
    Linux\ armv7*)
        STDLIB_DEPLOYMENT_TARGETS=("linux-armv7")
        ;;
    Linux\ aarch64)
        STDLIB_DEPLOYMENT_TARGETS=("linux-aarch64")
        ;;
    Darwin\ x86_64)
        STDLIB_DEPLOYMENT_TARGETS=(
            "macosx-x86_64"
            "iphonesimulator-i386"
            "iphonesimulator-x86_64"
            "appletvsimulator-x86_64"
            "watchsimulator-i386"

            # Put iOS native targets last so that we test them last
            # (it takes a long time).
            "iphoneos-arm64"
            "iphoneos-armv7"
            "appletvos-arm64"
            "watchos-armv7k"
        )
        ;;
    FreeBSD\ x86_64)
        STDLIB_DEPLOYMENT_TARGETS=("freebsd-x86_64")
        ;;
    *)
        echo "Unknown operating system"
        exit 1
        ;;
esac

After skipping lots more functions, we come across the meat of the process.

#
# Configure and build each product
#
# Start with native deployment targets because the resulting tools 
# are used during cross-compilation.
for deployment_target in "${NATIVE_TOOLS_DEPLOYMENT_TARGETS[@]}" \
                         "${CROSS_TOOLS_DEPLOYMENT_TARGETS[@]}"; do
    set_deployment_target_based_options

    # ... skipped compile option flag management ...

    # Build.
done

function set_deployment_target_based_options() {
    llvm_cmake_options=()
    swift_cmake_options=()
    cmark_cmake_options=()
    swiftpm_bootstrap_options=()

    case $deployment_target in
        linux-x86_64)
            SWIFT_HOST_VARIANT_ARCH="x86_64"
            ;;
        linux-armv7)
            SWIFT_HOST_VARIANT_ARCH="armv7"
            ;;
        linux-aarch64)
            SWIFT_HOST_VARIANT_ARCH="aarch64"
            ;;
        freebsd-x86_64)
            SWIFT_HOST_VARIANT_ARCH="x86_64"
            ;;
        macosx-* | iphoneos-* | iphonesimulator-* | \
          appletvos-* | appletvsimulator-* | \
            watchos-* | watchsimulator-*)
            # ... snipped tons of cross-compile for Apple devices stuff ...
        *)
            echo "Unknown compiler deployment target: $deployment_target"
            exit 1
            ;;
    esac
}

The important thing here is that the build process runs in full for each native target and cross target. At the beginning of the process the set_deployment_target_based_options function runs, and it sets the host variant for Swift. Remember at this point, it’s target variant, not host variant.

The rest of the script does the work of testing, packaging, and installing.

CMakeLists.txt

The CMakeLists.txt file provides¬†CMake instructions on how to actually build the tools using the flags and options determined by build-script and build-script-impl. ¬†I am far less than a novice in all things CMake, so please correct me if I make mistakes in this area, but this is what I’m able to infer from what’s happening.

Within CMakeLists.txt, we have to manually set CMAKE_SYSTEM_PROCESSOR unless the build is cross-compiled, or otherwise¬†already set. ¬†In linux (and FreeBSD) it’s set to the value of uname -m;¬†it’s just set to i386.

# Reset CMAKE_SYSTEM_PROCESSOR if not cross-compiling.
# CMake refuses to use `uname -m` on OS X
# http://public.kitware.com/Bug/view.php?id=10326
if(NOT CMAKE_CROSSCOMPILING AND CMAKE_SYSTEM_PROCESSOR STREQUAL "i386")
  execute_process(
    COMMAND "uname" "-m"
    OUTPUT_VARIABLE CMAKE_SYSTEM_PROCESSOR
    OUTPUT_STRIP_TRAILING_WHITESPACE)
endif()

Later, we use the value of CMAKE_SYSTEM_PROCESSOR to determine what architecture to build. ¬†Remember that if we’re not cross-compiling, its value is the host architecture. ¬†Also, note that cross-compiling is only available on Darwin (macosx):

# FIXME: separate the notions of SDKs used for compiler tools and target
# binaries.
if("${CMAKE_SYSTEM_NAME}" STREQUAL "Linux")
  set(CMAKE_EXECUTABLE_FORMAT "ELF")

  set(SWIFT_HOST_VARIANT "linux" CACHE STRING
      "Deployment OS for Swift host tools (the compiler) [linux].")

  set(SWIFT_HOST_VARIANT_SDK "LINUX")
  set(SWIFT_PRIMARY_VARIANT_SDK_default "LINUX")

  # FIXME: This will not work while trying to cross-compile.
  if("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "x86_64")
    configure_sdk_unix(LINUX "Linux" "linux" "linux" 
      "x86_64" "x86_64-unknown-linux-gnu")
    set(SWIFT_HOST_VARIANT_ARCH "x86_64")
    set(SWIFT_PRIMARY_VARIANT_ARCH_default "x86_64")
  # FIXME: This only matches ARMv7l (by far the most common variant).
  elseif("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "armv7l")
    configure_sdk_unix(LINUX "Linux" "linux" "linux" 
      "armv7" "armv7-unknown-linux-gnueabihf")
    set(SWIFT_HOST_VARIANT_ARCH "armv7")
    set(SWIFT_PRIMARY_VARIANT_ARCH_default "armv7")
  elseif("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "aarch64")
    configure_sdk_unix(LINUX "Linux" "linux" "linux" 
      "aarch64" "aarch64-unknown-linux-gnu")
    set(SWIFT_HOST_VARIANT_ARCH "aarch64")
    set(SWIFT_PRIMARY_VARIANT_ARCH_default "aarch64")
  else()
    message(FATAL_ERROR "Unknown or unsupported architecture: ${CMAKE_SYSTEM_PROCESSOR}")
  endif()
# ... snipped FreeBSD and Darwin branches ...

To make sense of this we really need to dig into the implementation of the configure_sdk_unix macro¬†in¬†SwiftConfigureSDK.cmake, otherwise the arguments are just a bunch of “linux” strings with an arch. and a triple.

macro(configure_sdk_unix
    prefix name lib_subdir triple_name arch triple)
  # Note: this has to be implemented as a macro because it sets global
  # variables.

  set(SWIFT_SDK_${prefix}_NAME "${name}")
  set(SWIFT_SDK_${prefix}_PATH "/")
  set(SWIFT_SDK_${prefix}_VERSION "don't use")
  set(SWIFT_SDK_${prefix}_BUILD_NUMBER "don't use")
  set(SWIFT_SDK_${prefix}_DEPLOYMENT_VERSION "don't use")
  set(SWIFT_SDK_${prefix}_LIB_SUBDIR "${lib_subdir}")
  set(SWIFT_SDK_${prefix}_VERSION_MIN_NAME "")
  set(SWIFT_SDK_${prefix}_TRIPLE_NAME "${triple_name}")
  set(SWIFT_SDK_${prefix}_ARCHITECTURES "${arch}")

  set(SWIFT_SDK_${prefix}_ARCH_${arch}_TRIPLE "${triple}")

  # Add this to the list of known SDKs.
  list(APPEND SWIFT_CONFIGURED_SDKS "${prefix}")

  _report_sdk("${prefix}")
endmacro()

This macro sets a number of CMake variables that will be used in both the generation of the swift compiler as well as the standard lib. ¬†An interesting thing to note is that the 4th “linux” should probably be “linux-x86_64” and “linux-arm”.

While building swift files, these variables are ultimately consumed in the cmake/modules/AddSwift file for a variety of tasks, such as finding the path to the libraries, setting sdk and target flags, etc. Not that in this module, what was ${prefix} becomes ${sdk}.

function(_add_variant_swift_compile_flags
  # ... snip ...
  list(APPEND result
      "-sdk" "${SWIFT_SDK_${sdk}_PATH}"
      "-target" "${SWIFT_SDK_${sdk}_ARCH_${arch}_TRIPLE}")
  # ... snipped stuff about optimization, etc. ...
endfunction()

function(_add_variant_link_flags
  # ... snip ...
  _add_variant_c_compile_link_flags(
      "${sdk}"
      "${arch}"
      "${build_type}"
      "${enable_assertions}"
      result)

  if("${sdk}" STREQUAL "LINUX")
    list(APPEND result "-lpthread" "-ldl")
  elseif("${sdk}" STREQUAL "FREEBSD")
    # No extra libraries required.
  else()
    list(APPEND result "-lobjc")
  endif()
  # ... snip ...
endfunction()

In cases where it’s not obvious where control flow leaves you, especially with how CMake seems to make liberal use of globals, I find it helpful to grep for variable names. Doing so for “SWIFT_SDK_${” led me to…

stdlib/public/runtime/CMakeLists.txt

Where I found this gem!

foreach(sdk ${SWIFT_CONFIGURED_SDKS})
  if("${sdk}" STREQUAL "LINUX" OR "${sdk}" STREQUAL "FREEBSD")
    foreach(arch ${SWIFT_SDK_${sdk}_ARCHITECTURES})
      set(arch_subdir "${SWIFT_SDK_${sdk}_LIB_SUBDIR}/${arch}")

      # FIXME: We will need a different linker script for 32-bit builds.
      configure_file(
          "swift.ld" "${SWIFTLIB_DIR}/${arch_subdir}/swift.ld" COPYONLY)

      swift_install_in_component(compiler
          FILES "swift.ld"
          DESTINATION "lib/swift/${arch_subdir}")

    endforeach()
  endif()
endforeach()

This FIXME is a big deal, because I hadn’t found it before. I was having linker issues with my binary, and this holds some promise helping address that issue. I’ll go ahead and add a check here, copy the 64-bit script and edit it for 32 bit.

foreach(sdk ${SWIFT_CONFIGURED_SDKS})
  if("${sdk}" STREQUAL "LINUX" OR "${sdk}" STREQUAL "FREEBSD")
    foreach(arch ${SWIFT_SDK_${sdk}_ARCHITECTURES})
      set(arch_subdir "${SWIFT_SDK_${sdk}_LIB_SUBDIR}/${arch}")

      if("${arch}" STREQUAL "arm")
        configure_file(
            "swift_32.ld" "${SWIFTLIB_DIR}/${arch_subdir}/swift.ld" COPYONLY)
      else()
        configure_file(
            "swift_64.ld" "${SWIFTLIB_DIR}/${arch_subdir}/swift.ld" COPYONLY)
      endif()

      swift_install_in_component(compiler
          FILES "swift.ld"
          DESTINATION "lib/swift/${arch_subdir}")

    endforeach()
  endif()
endforeach()

The 64-bit ld script is pretty small, and doesn’t seem too intimidating (I’ve never seen an ld script before):

SECTIONS
{
  .swift2_protocol_conformances :
  {
    .swift2_protocol_conformances_start = . ;
    QUAD(SIZEOF(.swift2_protocol_conformances) - 8) ;
    *(.swift2_protocol_conformances) ;
  }
}
INSERT AFTER .dtors

The only problem is that it’s far from obvious what needs to change when porting that to a 32-bit system!! My only guess is that 8*8 is 64-bits, so maybe that -8 needs to be a -4! ūüôā

SECTIONS
{
  .swift2_protocol_conformances :
  {
    .swift2_protocol_conformances_start = . ;
    QUAD(SIZEOF(.swift2_protocol_conformances) - 4) ;
    *(.swift2_protocol_conformances) ;
  }
}
INSERT AFTER .dtors

Unfortunately, that got me no where. Anyway, I’m getting ahead of myself. Moving on…

stdlib/public/SwiftShims/LibcShims.h

This one is an easy one… ¬†All we have to do is make a new typedef for __swift_ssize_t for the 32-bit arm:

#if defined(__linux__) && defined (__arm__)
typedef      int __swift_ssize_t;
#else
 typedef long int __swift_ssize_t;
#endif

stdlib/public/stubs/Stubs.cpp

Next, we have to deal with the fact that a multiply with overflow is missing from what libgcc provides us. I’ll leave this out for brevity, but basically I just copied an implementation from the compiler-rt project.

lib/Driver/ToolChains.cpp

ToolChains.cpp is an interesting one because it is responsible for linking the compiler pieces together when building swift applications. In the original version, the x86_64 path to the swift stdlib was hard-coded in there. Now, we just have to query the target triple, and select the correct path to the library.

- Arguments.push_back(		+    
-   context.Args.MakeArgString(Twine(RuntimeLibPath) + "/x86_64/swift.ld"));

~ becomes ~

+ Arguments.push_back(context.Args.MakeArgString(
+   Twine(RuntimeLibPath) + "/" + getTriple().getArchName() + "/swift.ld"));

Testing files

There were several files that affect the testing suite. This post is already way to long, so I’ll leave those out. If you want to see all the changes I’ve made, checkout the commit:

Summary

This port is getting pretty close. My 32-bit linker script doesn’t fix anything, and I’m still looking for other potential problems. But, for now I’m happy with the progress. I hope this helps anyone else exploring other ports. The 32-bit arm port is potentially the simplest possible one, because the older iPhones and iWatch use 32-bit arm chips.

Update 12/16/2015

I was able to fix the linking problem by looking at another exciting swift port (SwiftAndroid), and noticing that -Bsymbolc is being used in the AddSwift cmake module.

if("${sdk}" STREQUAL "LINUX")
    list(APPEND result "-lpthread" "-ldl" "-Wl,-Bsymbolic")
  elseif("${sdk}" STREQUAL "FREEBSD")
    # No extra libraries required.
  else()
    list(APPEND result "-lobjc")
  endif()

I added that to my copy of AddSwift, and it seems to work beautifully. I will do some more testing and clean up, and submit a new pull request.

$ cat hello.swift 
print("Hello world!")
$ swiftc hello.swift 
$ ./hello
Hello world!
$ uname -s -m
Linux armv7l
Tags: , , ,